MAKE MEHNDI ORNAMENT

Step 1What you need

i

a ceramic plate & a stand
a mehndi/henna cone or 3D out liner
small container
a paint brush
glue-you need to use a glue which would turn transparent when it's dry
water-not shown

Step 2Designing

i

Start designing the design and if you like write a quote and keep it to dry in sunlight.if any water is present the out come will turn bad,because of the moisture you can c fungus on them.

Step 3Sealing the design

i

when the henna on the candle is dry.in a small container,take some glue wt little amount of water.don't make it too watery,it should be a thick mixture of water n glue.

apply the mixture on the henna with a paint brush.don't apply it in a up and down movement.just keep drops of mixture on henna,and it will absorb.apply it only on the henna.keep it on a piece of paper to avoid glue dripping on your work top.

when the first coat of glue dries,apply another glue coat over it.and let it dry for about 6 hours

Step 4Done!!!!

i

you are done!!! enjoy :)